A
-
Abbasian, Mojtaba
Preparation and Characterization of Hyperbranched Polystyrene Nanocomposite Synthesized by Living Radical Polymerization and Solution Intercalation Method [Volume 24, Issue 6, 2012, Pages 433-443]
-
Abdulkhani, Ali
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Abedini, Hossein
Steady State Simulation of Two-Gas Phase Fluidized Bed Reactors in Series for Producing Linear Low Density Polyethylene [Volume 24, Issue 4, 2011, Pages 301-316]
-
Abolghasemi Fakhri, Leila
The Effects of Montmorillonite and Cellulose Nanocrystals on Physical Properties of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Films [Volume 24, Issue 6, 2012, Pages 455-466]
-
Ahmadian-Alam, L.
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Ahmadian-Alam, laleh
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Atai, Mohammad
Mechanical and Anti-bacterial Properties of Dental Adhesive Containing Diamond Nanoparticles [Volume 24, Issue 2, 2011, Pages 121-131]
-
Azadeh, Maedeh
Mesoporous Silica Formation by Block Copolymers and Cetyltrimethylammonium Bromide as Structure Control Agent [Volume 24, Issue 6, 2012, Pages 445-453]
B
-
Bagheri Marandi, Gholam
Alginate-based Hydrogel Nanocomposites Made by Carbon Nanotubes and Acrylamide/Itaconic acid as Co-monomers [Volume 24, Issue 5, 2012, Pages 413-423]
-
Bagheri Marandi, Gholam
Synthesis of Hydrogel Nanocomposites of Acrylamide-Itaconic Acid Using Laponite and Study of Crystal Violet Dye Adsorption [Volume 24, Issue 6, 2012, Pages 505-514]
-
Baghersad, rasool
Non-linear Behavior of Polymer Based Composite Laminates under Cyclic Thermal Shock and Its Effects on Residual Stresses [Volume 24, Issue 2, 2011, Pages 133-140]
-
Baharloui, Maryam
Synthesis of Hydrogel Nanocomposites of Acrylamide-Itaconic Acid Using Laponite and Study of Crystal Violet Dye Adsorption [Volume 24, Issue 6, 2012, Pages 505-514]
-
Bakhshandeh, Gholam Reza
Synthesis of Aluminum Triacrylate as Reactive Filler in EPDM Reinforcement [Volume 24, Issue 3, 2011, Pages 195-204]
-
Bakhshandeh, Gholam Reza
Elastomer Nanocomposites Based on Organoclay/IIR/EPDM: Microstructure and Mechanical Properties [Volume 24, Issue 5, 2012, Pages 343-353]
-
Barikani, Mehdi
Effect of Fire Retardants in Improvement of Combustion Restriction and Thermal Decomposition of Polyurethane Foams: A Review [Volume 24, Issue 1, 2011, Pages 3-31]
-
Basiri, Laleh
Elastomer Nanocomposites Based on Organoclay/IIR/EPDM: Microstructure and Mechanical Properties [Volume 24, Issue 5, 2012, Pages 343-353]
-
Beheshty, mohammad hossein
Nano Clay Effect on Morphology, Mechanical Properties and Water Absorption of Vinyl Ester-Based Nanocomposites [Volume 24, Issue 2, 2011, Pages 83-92]
D
-
Dadkhah, Arezo
Synthesis of Poly(para-phenylene terephthalamide) and Preparation of Short Fibers: Effect of Sodium Sulphate on the Fibers [Volume 24, Issue 2, 2011, Pages 113-120]
-
Dehghannia, Jalal
The Effects of Montmorillonite and Cellulose Nanocrystals on Physical Properties of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Films [Volume 24, Issue 6, 2012, Pages 455-466]
E
-
Ebadi, zeinab
Mechanical and Anti-bacterial Properties of Dental Adhesive Containing Diamond Nanoparticles [Volume 24, Issue 2, 2011, Pages 121-131]
-
Ebrahimi, Ghanbar
Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods [Volume 24, Issue 3, 2011, Pages 171-179]
-
Ebrahimi, morteza
Mechanical and Anti-bacterial Properties of Dental Adhesive Containing Diamond Nanoparticles [Volume 24, Issue 2, 2011, Pages 121-131]
-
Ehsani-zonuz, Javad
Mechanical Properties, Shrinkage Behavior and Water Absorption of PA6/PP/CaCO3 Nanocomposites [Volume 24, Issue 6, 2012, Pages 481-492]
-
Entezami, Ali Akbar
Comparison of Tensile, Permeability and Color Properties of Starch-based Bionanocomposites Containing Two Types of Fillers: Sodium Montmorilonite and Cellulose Nanocrystal [Volume 24, Issue 5, 2012, Pages 391-402]
-
Entezami, Ali Akbar
Preparation and Characterization of Hyperbranched Polystyrene Nanocomposite Synthesized by Living Radical Polymerization and Solution Intercalation Method [Volume 24, Issue 6, 2012, Pages 433-443]
-
Entezami, Ali Akbar
The Effects of Montmorillonite and Cellulose Nanocrystals on Physical Properties of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Films [Volume 24, Issue 6, 2012, Pages 455-466]
-
Erfanian, Mohamad Reza
Simulation of Injection Molding Process Including Mold Filling and Compound Curing [Volume 24, Issue 4, 2011, Pages 317-327]
-
Esmaeely Nisiany, Rasool
Design, Construction, and Evaluation of Rubber Friction Tester [Volume 24, Issue 2, 2011, Pages 153-164]
F
-
Fakhri, Mansour
Modification of Asphalt Pavement with Polysulfide Polymer [Volume 24, Issue 3, 2011, Pages 241-249]
-
Farhangiyan Kashani, Ali
Steady State Simulation of Two-Gas Phase Fluidized Bed Reactors in Series for Producing Linear Low Density Polyethylene [Volume 24, Issue 4, 2011, Pages 301-316]
-
Fathi, Asghar
Preparation and Characterization of Hyperbranched Polystyrene Nanocomposite Synthesized by Living Radical Polymerization and Solution Intercalation Method [Volume 24, Issue 6, 2012, Pages 433-443]
G
-
Ghabezi, Pouyan
Mechanical Behavior of Quasi-sinusoidal Corrugated Composite sheets [Volume 24, Issue 5, 2012, Pages 379-389]
-
Ghanbarzadeh, Babak
Comparison of Tensile, Permeability and Color Properties of Starch-based Bionanocomposites Containing Two Types of Fillers: Sodium Montmorilonite and Cellulose Nanocrystal [Volume 24, Issue 5, 2012, Pages 391-402]
-
Ghanbarzadeh, Babak
The Effects of Montmorillonite and Cellulose Nanocrystals on Physical Properties of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Films [Volume 24, Issue 6, 2012, Pages 455-466]
-
Ghasemi, ahmad reza
Non-linear Behavior of Polymer Based Composite Laminates under Cyclic Thermal Shock and Its Effects on Residual Stresses [Volume 24, Issue 2, 2011, Pages 133-140]
-
Ghoreishy, Mir Hamid Reza
The Effect of Silica/Carbon Black Filler Systems on the Fatigue Properties of the Tread Compound in Passenger Tires [Volume 24, Issue 4, 2011, Pages 329-337]
-
Ghoreishy, Mir Hamid Reza
Simulating Mechanical Behavior of a Tread Rubber Compound by a Hyperelastic/Hysteresis Model [Volume 24, Issue 5, 2012, Pages 369-377]
-
Gilani, Mahdi
Preparation of Acrylamide-based Anionic Polyelectrolytes for Soil Establishment [Volume 24, Issue 4, 2011, Pages 291-300]
-
Golzar, Mohammad
Mechanical Behavior of Quasi-sinusoidal Corrugated Composite sheets [Volume 24, Issue 5, 2012, Pages 379-389]
H
-
Haddadi-Asl, vahid
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Haddadi asl, Vahid
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Hamzeh, Yahya
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Hatami, leila
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Hatami, Lila
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Hejazi, Sahab
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
J
-
Jalilian, Seyed Mehrdad
Vinyl Chloride Emulsion Polymerization Reaction: Effect of Various Formulations [Volume 24, Issue 3, 2011, Pages 205-214]
-
Jamal Omidi, Majid
The Impact Resistance of Fiber-Reinforced Polymer Composites: A Review [Volume 24, Issue 4, 2011, Pages 255-277]
-
Jamshidi, Hajar
Preparation of Acrylamide-based Anionic Polyelectrolytes for Soil Establishment [Volume 24, Issue 4, 2011, Pages 291-300]
-
Javadi, Seyed Mohamad
Simulation of Injection Molding Process Including Mold Filling and Compound Curing [Volume 24, Issue 4, 2011, Pages 317-327]
-
Jaymand, Mehdi
Preparation and Characterization of Hyperbranched Polystyrene Nanocomposite Synthesized by Living Radical Polymerization and Solution Intercalation Method [Volume 24, Issue 6, 2012, Pages 433-443]
-
Joorabloo, Ali Reza
Functionality Effect of Acrylic Pressure Sensitive Adhesive Formulations on Release Performance and Adhesion Properties of Stimulants in
an Adhesive Patch [Volume 24, Issue 6, 2012, Pages 493-503]
-
Jowdar, Effat
Nano Clay Effect on Morphology, Mechanical Properties and Water Absorption of Vinyl Ester-Based Nanocomposites [Volume 24, Issue 2, 2011, Pages 83-92]
K
-
Kalaie, Mohammad Reza
Steady State Simulation of Two-Gas Phase Fluidized Bed Reactors in Series for Producing Linear Low Density Polyethylene [Volume 24, Issue 4, 2011, Pages 301-316]
-
Kazemifard, Sholeh
Polymer-Modified Bitumen Production Based on Performance Grade for Application in Different Zones of Iran [Volume 24, Issue 6, 2012, Pages 467-479]
-
Keshmirizadeh, elham
Kinetics of Waterborne Alkyd/Acrylic Hybrid Resin Free Radical Polymerization by Two Systems of Redox and Thermal Initiators [Volume 24, Issue 2, 2011, Pages 141-152]
M
-
M.Shokrieh, Mamhmood
Influence of Physical, Thermal and Mechanical Parameters on Micro Residual Stresses in Polymeric Composites [Volume 24, Issue 5, 2012, Pages 355-368]
-
Madadi, shirin
Kinetics of Waterborne Alkyd/Acrylic Hybrid Resin Free Radical Polymerization by Two Systems of Redox and Thermal Initiators [Volume 24, Issue 2, 2011, Pages 141-152]
-
Madhoushi, Mehrab
Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods [Volume 24, Issue 3, 2011, Pages 171-179]
-
Mahmoodpoor Sharbian, Lila
Alginate-based Hydrogel Nanocomposites Made by Carbon Nanotubes and Acrylamide/Itaconic acid as Co-monomers [Volume 24, Issue 5, 2012, Pages 413-423]
-
Mehrdad Shokrieh, Mahmood
The Impact Resistance of Fiber-Reinforced Polymer Composites: A Review [Volume 24, Issue 4, 2011, Pages 255-277]
-
Mirshokraie, Seyed Ahmad
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Moghadas Nejad, Fereydon
Polymer-Modified Bitumen Production Based on Performance Grade for Application in Different Zones of Iran [Volume 24, Issue 6, 2012, Pages 467-479]
-
Moghiman, Mohamad
Simulation of Injection Molding Process Including Mold Filling and Compound Curing [Volume 24, Issue 4, 2011, Pages 317-327]
-
Mokhtari, Javad
Effect of Nanoclay on the Electrospinning of Poly(ε-caprolactone) [Volume 24, Issue 3, 2011, Pages 231-240]
-
Montakhabi-Kalajahi, Saeed
Mechanical Properties, Shrinkage Behavior and Water Absorption of PA6/PP/CaCO3 Nanocomposites [Volume 24, Issue 6, 2012, Pages 481-492]
N
-
Naderi, Ghasem
Synthesis of Aluminum Triacrylate as Reactive Filler in EPDM Reinforcement [Volume 24, Issue 3, 2011, Pages 195-204]
-
Naderi, Ghasem
Elastomer Nanocomposites Based on Organoclay/IIR/EPDM: Microstructure and Mechanical Properties [Volume 24, Issue 5, 2012, Pages 343-353]
-
Nouri, Arezou
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Nouri, Mehdi
Effect of Nanoclay on the Electrospinning of Poly(ε-caprolactone) [Volume 24, Issue 3, 2011, Pages 231-240]
-
Noushirvani, Nooshin
Comparison of Tensile, Permeability and Color Properties of Starch-based Bionanocomposites Containing Two Types of Fillers: Sodium Montmorilonite and Cellulose Nanocrystal [Volume 24, Issue 5, 2012, Pages 391-402]
R
-
Rabiee, Ahmad
Preparation of Acrylamide-based Anionic Polyelectrolytes for Soil Establishment [Volume 24, Issue 4, 2011, Pages 291-300]
-
Razzaghi Kashani, Mehdi
Design, Construction, and Evaluation of Rubber Friction Tester [Volume 24, Issue 2, 2011, Pages 153-164]
-
Roghani-Mamaqani, H.
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Roghani-Mamaqani, hossein
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Rostami Daronkola, Mohamad Reza
Kinetic Study of Atom Transfer Radical Polymerization of Methyl Acrylate with Polyvinyl Acetate Macroinitiator [Volume 24, Issue 3, 2011, Pages 181-193]
-
Rostamloo, Mahsa
Effect of Nanoclay on the Electrospinning of Poly(ε-caprolactone) [Volume 24, Issue 3, 2011, Pages 231-240]
S
-
Sadatzadeh, Sahar
Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods [Volume 24, Issue 3, 2011, Pages 171-179]
-
Sadeghi Ghari, Hedayatollah
Physical Chemistry and Rheological Behavior of Commercial Polymers of Viscosity Index Improver Used in Motor Oil Industry [Volume 24, Issue 3, 2011, Pages 215-230]
-
Safarabadi, Majid
Influence of Physical, Thermal and Mechanical Parameters on Micro Residual Stresses in Polymeric Composites [Volume 24, Issue 5, 2012, Pages 355-368]
-
Salami, M.
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Salami-Kalajahi, Mahdi
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Semsarzadeh, Mohamad Ali
Kinetic Study of Atom Transfer Radical Polymerization of Methyl Acrylate with Polyvinyl Acetate Macroinitiator [Volume 24, Issue 3, 2011, Pages 181-193]
-
Semsarzadeh, Mohamad Ali
Mesoporous Silica Formation by Block Copolymers and Cetyltrimethylammonium Bromide as Structure Control Agent [Volume 24, Issue 6, 2012, Pages 445-453]
-
Semsarzadeh, mohammad ali
Synthesis of Poly(para-phenylene terephthalamide) and Preparation of Short Fibers: Effect of Sodium Sulphate on the Fibers [Volume 24, Issue 2, 2011, Pages 113-120]
-
Shahabi, Mehdi
Polymer-Modified Bitumen Production Based on Performance Grade for Application in Different Zones of Iran [Volume 24, Issue 6, 2012, Pages 467-479]
-
Shakouri, Zahra
Physical Chemistry and Rheological Behavior of Commercial Polymers of Viscosity Index Improver Used in Motor Oil Industry [Volume 24, Issue 3, 2011, Pages 215-230]
-
Shelesh-Nezhad, Karim
Mechanical Properties, Shrinkage Behavior and Water Absorption of PA6/PP/CaCO3 Nanocomposites [Volume 24, Issue 6, 2012, Pages 481-492]
-
Shirkavand Hadavand, Behzad
Modification of Asphalt Pavement with Polysulfide Polymer [Volume 24, Issue 3, 2011, Pages 241-249]
-
Shokoohi, Shirin
Elastomer Nanocomposites Based on Organoclay/IIR/EPDM: Microstructure and Mechanical Properties [Volume 24, Issue 5, 2012, Pages 343-353]
-
Shokrzadeh, Akram
Synthesis of Aluminum Triacrylate as Reactive Filler in EPDM Reinforcement [Volume 24, Issue 3, 2011, Pages 195-204]
-
Shoushtari-Zade, Aida
Sample Thickness and Structural Changes in Thermo-Oxidative Degradation of Polybutadiene [Volume 24, Issue 2, 2011, Pages 93-99]
T
-
Taghizadeh, S. Mojtaba
Functionality Effect of Acrylic Pressure Sensitive Adhesive Formulations on Release Performance and Adhesion Properties of Stimulants in
an Adhesive Patch [Volume 24, Issue 6, 2012, Pages 493-503]
-
Taghvaei, Saeed
The Effect of Silica/Carbon Black Filler Systems on the Fatigue Properties of the Tread Compound in Passenger Tires [Volume 24, Issue 4, 2011, Pages 329-337]
V
-
Vaziri Sereshk, mohammad reza
Non-linear Behavior of Polymer Based Composite Laminates under Cyclic Thermal Shock and Its Effects on Residual Stresses [Volume 24, Issue 2, 2011, Pages 133-140]
Y
-
Yazdi Aznaveh, Hani
Modification of Asphalt Pavement with Polysulfide Polymer [Volume 24, Issue 3, 2011, Pages 241-249]
-
Yousefi, ali akbar
Kinetics of Waterborne Alkyd/Acrylic Hybrid Resin Free Radical Polymerization by Two Systems of Redox and Thermal Initiators [Volume 24, Issue 2, 2011, Pages 141-152]
Z
-
Zafar Mehrabian, Ramin
The Effect of Silica/Carbon Black Filler Systems on the Fatigue Properties of the Tread Compound in Passenger Tires [Volume 24, Issue 4, 2011, Pages 329-337]
-
Ziaee, farshid
Sample Thickness and Structural Changes in Thermo-Oxidative Degradation of Polybutadiene [Volume 24, Issue 2, 2011, Pages 93-99]
-
Ziaee, Farshid
Vinyl Chloride Emulsion Polymerization Reaction: Effect of Various Formulations [Volume 24, Issue 3, 2011, Pages 205-214]
-
Ziaee, Farshid
Determination of Polybutadiene Unsaturation Content in Thermal and Thermo-Oxidative Degradation Processes by NMR [Volume 24, Issue 5, 2012, Pages 403-412]
-
Zohuriaan-Mehr, Mohamad Jalaledin
Synthesis of Aluminum Triacrylate as Reactive Filler in EPDM Reinforcement [Volume 24, Issue 3, 2011, Pages 195-204]
Your query does not match with any item